Shenzhen Meixin Technology Co., Ltd.
Quality, Service, Creative, Thanksgiving
Add to Cart
Industrial Ultrasonic Cleaner Cylinder Degrease 50cm Long 40kHz Frequency
Packing list:
1x LS-30 ultrasonic cleaner
1x SUS basket
1x SUS lid
1x power cord
1x English instruction manual
Specifications:
| Model | LS-30 |
| Tank capacity | 30L |
| Material | Stainless steel SUS304 |
| Frequency | 40KHz |
| Tank Size | 500x300x200mm ( L x W x H ) (19.7"x11.8"x7.9") |
| Overall Size | 530x330x350mm( L x W x H ) (20.9"x13"x13.8") |
| Carton size | 634x400x440 mm ( L x W x H ) (25"x15.7"x17.3") |
| Timer | 0-30min |
| Temperature | 20~80C adjustable |
| Power supply | AC 100-120V, 50/60Hz; AC 220-240V, 50/60Hz |
| Ultrasonic power | 600W |
| Heating power | 500W |
| N.W | 14 kg |
| G.W | 16 kg |
| Warranty time | 12 months |
| Shipping method | DHL , FedEx , UPS , TNT , EMS , ARAMEX , By Air,By sea |
Any capacity is available from us. Tank size can be design based on your requirement.
Limplus Advantages:
1. With BLT type industrial ultrasonic transducer
2. SUS304 tank with long work life, T=1.1mm
3. With SUS basket to load objects and can improve cleaning performance
4. With SUS lid to encrease temperature faster and reduce ultrasonic noise
5. Certificate: CE
6. With 12months warranty
7. With heater for better cleaning effect, separate ON/OFF switch for timer and heater
8. With Drainage
9. Professional ultrasonic glue to avoild transducer loose
FAQ:
Q: How about warranty time?
A.: 1 year warranty for all of Limplus objects.
Q.: How about delivery time?
A.: Immediate for sample. for large order, time is negotiable.
Q.: How best to make ultrasonic cleaning?
A.: There are many factors affecting the ultrasonic cleaning.most are the right choice of cleaning solution, its temperature, ultrasonic power and duration of treatment. Besides choosing the bath etc to consider the size of parts and components that will be cleaned.
Q.: What frequency is good for my objects?
A.: Higher frequency, smaller power; lower frequency, stronger power.
If clean precision objects, suggest 40kHz or even higher.
If clean metal parts remove oil, flux, etc, 28kHz is ok.
